Mustang Survival EP 38 Guide D'utilisation page 6

FIGURE 3
• Undo the Velcro™ at the bottom of the PFD, exposing the bottom
pleat (or gusset)
• Using a double half hitch knot (Fig. 3), tie the orange lanyard to
the small loop located in the bottom pleat, towards the back of
the PFD, behind the lifting loop. Make sure to tie the lanyard off as
short as possible, taking up all the slack in the lanyard when the
sides and bottom of the PFD are folded in (Fig. 4)
NOTE: IN ORDER FOR THE S20 TO BE ACTIVATED BY THE PFD INFLATION THE
LANYARD NEEDS TO BE AS SHORT AS POSSIBLE WITHOUT AFFECTING THE SHAPE
OF THE PFD WHEN IT IS FULLY PACKED
• Tie the end of what remains of the lanyard to the white portion of
the S20 using a bowline knot. This will secure the S20 to the PFD
in the event that the S20 is freed from the attachment tab (Fig. 4).
Leave plenty of slack in this section of the lanyard to ensure it does
not pull the S20 when the PFD is inflated. Insert the whistle on the
tab, beside the S20.
6
MUSTANG SURVIVAL / OWNER'S MANUAL – AIS INSTALLATION