Using Reveal On Another Screen; Troubleshooting - Humanware Reveal 16 Guide D'utilisation

USING REVEAL ON ANOTHER SCREEN

For a larger image, you may want your Reveal's content to be displayed on an external
screen (like a TV). To do so, simply connect your Reveal to an external screen using a High-
Resolution video cable.

TROUBLESHOOTING

Reveal does not power on:
Press and hold Power. If the unit still does not turn on, make sure your device is plugged in
the outlet.
Image is out of focus in magnifier:
Press and hold the Autofocus Lock button or move your hand back and forth over the
document you are viewing. This will make your Reveal refocus on the document.
Screen is black:
Make sure the camera is in its default position, aiming at the reading tray.
Reveal shuts down after inactivity:
This is a normal behaviour intended to preserve your screen. By default, Reveal will shut
down after 10 minutes of inactivity. It is possible to configure the default auto-off timer to
10 minutes, 20 minutes, 30 minutes, or never.
Reveal does not respond:
Press the Power button for 10 seconds. The system will shut down. Then, press Power for
one second to turn your Reveal back on.
Other problems:
Restore to factory defaults in the menu.
Press and hold Contrast.
Scroll down to Factory Defaults and select Yes.
*Warning! All your previous configurations will be lost!*
16