Line And Blinds; Adding A Line Or Blinds; Adjusting A Line Or Blinds - Humanware Reveal 16 Guide D'utilisation

You can add a horizontal line or blinds over your image for easier reading. See images below for an
example.
Line

ADDING A LINE OR BLINDS

To add a line or blinds to the screen:
Press the Autofocus Lock and Zoom buttons simultaneously to add/remove a line and blinds.
Alternatively, to add a line or blind as your default settings:
1. Open the menu by pressing and holding the Contrast button.
2. Press the Zoom button to enter the Line and blinds submenu.
3. Select between None, Line, or Blinds according to your preferences.
4. Press the Zoom button.

ADJUSTING A LINE OR BLINDS

After selecting a line or blinds, a new "Adjust" option will appear in the menu.
1. Select the adjust option to change the position of the line or the width of the blinds.
2. Press the zoom button.
3. Turn the Zoom button until you find the perfect position or width.

LINE AND BLINDS

Adjust line or blinds
15
Blinds
Press to confirm