Control Panel - Briteq BT-W36L3 WASH Mode D'emploi

ENGLISH
1. Optional safety cable to be fixed here
2. Special omega clamp (included) to be fixed here.
HOW TO SET UP THE UNIT

CONTROL PANEL:

1. DISPLAY shows the various menus and the selected functions.
2. LEDS
3. BUTTONS
4. REMOTE CONTROL INPUT: Used to connect a simple CA-8 hand controller while the unit is used in
standalone or master/slave mode.
5. DMX INPUT/OUTPUT: used for DMX512 linking. Use good quality 3pin XLR M/F balanced cable to link
the units together.
6. MAINS INPUT AND OUTPUT: with PowerCon sockets, connect the supplied mains cable here, you can
daisy chain up to 10 units.
BRITEQ
®
DMX On
MASTER On
SLAVE On
SOUND Flashing
MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions
DMX input present
Master mode
Slave mode
Sound activation
4/83
OPERATION MANUAL
BT-W36L3