Briteq BT-W36L3 WASH Mode D'emploi page 17

ENGLISH
9
10
11
12
Extra information on some special features
1. To avoid accidental activation/de-activation of the "fixture control settings" a certain time lag is build in.
This means that you have to keep the DMX-value for a certain time before the selected function is
activated. This delay can be set between 0s and 3s delay, please refer to the setup menu "Function
delay" paragraph for more information.
2. RGB is a calibrated RGB-mode using the white balance in the setup menu as a reference. This results
in slightly less output than RAW mode but consistent color balance across fixtures.
3. RAW is an uncalibrated RGB-mode which means that it does NOT use the white balance settings as a
reference. This mode gives maximum output and slightly more saturated color, but there may be
inconsistency in color balance between fixtures.
4. To keep maximum accuracy, the LEE filter colors selected on channel8 are always referred to the white
balance settings made in the setup menu. Choosing the RAW-mode will not affect the LEE-filter colors.
BRITEQ
®
95 - 99 LEE 118 - Light Blue
100 - 104 LEE 116 - Medium Blue Green
105 - 109 LEE 124 - Dark Green
110 - 114 LEE 139 - Primary Green
115 - 119 LEE 089 - Moss Green
120 - 124 LEE 122 - Fern Green
125 - 129 LEE 738 - JAS Green
130 - 134 LEE 088 - Lime Green
135 - 139 LEE 100 - Spring Yellow
140 - 144 LEE 104 - Deep Amber
145 - 149 LEE 179 - Chrome Orange
150 - 154 LEE 105 - Orange
155 - 159 LEE 021 - Gold Amber
160 - 164 LEE 778 - Millennium Gold
165 - 169 LEE 135 - Deep Golden Amber
170 - 174 LEE 164 - Flame Red
175 - 179 Open
Color wheel rotation effect
Clockwise, fast → slow
180 - 201
202 - 207 Stop (this will stop wherever the color is at the time)
Counter-clockwise, slow → fast
208 - 229
230 - 234 Open
Random color
235 - 239 Fast
240 - 244 Medium
245 - 249 Slow
250 - 255 Open
0-255 Red 0 to 100%
Green 0 to 100%
0-255
0-255 Blue 0 to 100%
0-255 Color Temperature control 10000K-2500K
15/83
OPERATION MANUAL
BT-W36L3