Samson Smart Control Manuel D'installation Et Mise En Service page 61

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Refer to the following table for a description of the
individual menu items
Menu
Display
no. /
Installation and starting instructions Smart Control
Description
The main screen shows the status of the system.
The EASY menu only makes it possible to set the
control mode and the 1st setpoint.
The EXPERT menu contains other settings that
can be used for a detailed setting of the switch-
gear.
Menu for selecting the required control modes.
The "Pressure constant" control mode is currently
the only possible choice.
The parameter menu for all settings that influence
operation.
The setting menu for setpoints 1 and 2
(only in EXPERT menu).
English
Parameter range
Factory setting
p-c
53

Publicité

Table des Matières
loading

Table des Matières