Maintenance And Care; Disposal; Warranty And Servicing - Tru-Test HD5T Load Bars Guide De Démarrage Rapide

Maintenance and care

7
Ensure that the underside of the crush/chute and gap between the load bar

housing and load bar foot is kept free of dirt and stones.
Do not leave the indicator, load bars or plugs immersed in water.

Cables should be installed so that they will not be damaged. We recommend

routing the cables through plastic casing/conduit to help prevent damage.
When not in use, always replace the dust caps on the load bar plugs. When the

load bars are connected to the indicator, screw the two dust caps together.
Remove dust and moisture from the plugs and caps using methylated spirits,
ethyl alcohol, or a suitable electrical contact cleaner. Stronger spirits must not
be used, as they may react with the plastic.

Disposal

8
This product must be disposed of separately from household waste.
Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling,
please contact your local city recycling office or the dealer from whom
you purchased the product.

Warranty and servicing

9
For service and warranty information, see www.tru-test.com/product-warranty
9