Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Models covered by this manual
This manual covers various energizer models:
0.15 J model
S150 / SXJ / 702S / PS15
0.25 J model
S250 / SX / SolStar
Key to symbols on the energizer
The energizer should be opened or repaired only by qualified
personnel in order to reduce the risk of electric shock.
Read full instructions before use.
This symbol on the product or its packaging indicates that this
product must not be disposed of with other waste. Instead, it is
your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of
disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the
environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local
city recycling office or the dealer from whom you purchased the
product.
Parts of the energizer
0.15 J model
1
On/Off switch
(0.15 J model)
Power/Power level button
model)
2
Pulse indicator light
3
Display (0.25 J model)
Installation
To set up the energizer for use, install the battery and connect the
energizer to an electric fence and an earthing system.
Installing the battery
1
Place the energizer on a flat surface. Open the battery
compartment by pressing the latches firmly (see diagram
below).
2
Insert the battery.
3
Connect the positive (red) lead to the positive (+) terminal on
the battery.
4
Connect the negative (black) lead to the negative (–) terminal
on the battery.
5
Close the battery compartment.
0.25 J model
4
Pulse speed button
5
Fence earth terminal
(0.25 J
6
Post-mounting slot
7
Fence output terminal
Electric fencing and your Tru-Test
energizer
Congratulations on your purchase of a Tru-Test energizer. This
product has been constructed using the latest technology and
construction techniques. It has been engineered to give superior
performance and many years of service.
It is important to read these instructions carefully and thoroughly.
They contain important safety information and will assist you in
ensuring that your electric fencing system gives maximum
performance and reliability.
Warning!
- Do not connect to mains-operated or line-operated equipment.
- Remove the battery from the energizer before using an external
battery charger to recharge the battery.
- Switch the energizer off before installation or performing any
work on the fence.
- Do not connect simultaneously to a fence and to any other
device such as a cattle trainer or a poultry trainer. Otherwise,
lightning striking your fence will be conducted to all other
devices.
Note: This product has been designed for use with electric animal
fences.
8
(0.25 J model)
9
10
11
Positioning the energizer
Install the energizer:
•
adjacent to the electric fence
•
preferably in the middle of the electric fence
•
where it will receive the most daily sun throughout the season
•
where a good earth can be obtained
Solar panel
Battery
Battery compartment
Latches
1
Publicité
Table des Matières
