Testing - Tru-Test HD5T Load Bars Guide De Démarrage Rapide

Testing

5
Once installed, you should test the load bars with your Tru-Test weigh scale
indicator:
1. Ensure your weigh scale indicator has had the latest software version installed.
2. Power on and zero the indicator, if required.
3. Put a test weight (which may be yourself or another person) at one end of the
crush/chute and note the stable reading on the indicator.
4. Take the weight off, and put it on the other end of the crush/chute and note the
stable reading on the indicator.
5. Remove the test weight and note whether the reading returns to zero.
6. If the two readings differ by more than 1 kg OR the reading does not return to
Troubleshooting
zero, see the
Periodically repeat the above test during use and also before use if the equipment
has not been used for a long time.
section.
7