Block Wiring Diagrams - Harvia sentiotec wave.com4 touch II Instructions De Montage Et Mode D'emploi

6.3 Block wiring diagrams

wave.com4 sauna basic modules (WC4-B-L) with a production date prior to 12/2011 are not compatible
with the wave.com4 touch. The necessary software update can only be executed at the factory.
The individual devices are connected via 6-pin RJ12 cables (D and E). A connection cable D is contained in the
scope of supply of the wave.com4 touch operating element. An O-CX-C10 (E) connection cable must be
ordered for each power element for the connection of several power elements.
Block wiring diagram, fully extended
If only the wave.com4 sound & light and the wave.com4 sauna basic module are used, a Y-connector F is also
required. This is contained in the WC4-SL-EXT set.
The data cable E is also contained in the WC4-SL-EXT set
sound & light block wiring diagram with wave.com4 Sauna
WORLD OF WELLNESS
Instructions for installation and use – only for experts
6-pin operating
element
6-pin operating
element
P. 8/22