Installation Instructions; Power Supply Connections; Installation Procedure - Eneo VKC-1324A/W3 Instructions D'installation Et D'utilisation

5. Installation Instructions

• Make sure the power is removed before installation.

5.1 Power Supply Connections

DC plug for all 12VDC cameras
AC or DC plug connection for VKC-1327A/W3 and VKC-1327A-IR/W3
VDC/4VAC
GND/4VAC
Easy Installation cable
cable side:
white (GND)
yellow (Video)
red (DC+)
black (DC–)

5.2 Installation Procedure

Connection (Easy installation) in base of casing
. The cover cap serves to protect against dirt during the installation (e.g. when the cable is led through a wall).
. The attached shrink tube serves to protect the connection.
To use this, cut off a suitable amount, push it over the connection and shrink it.