Record Output; Pre-Amplifier Output; Adjusting The Balance; Listening - Arcam FMJ A29 Manuel

MUTE DISPLAY BALANCE
A29

Record output

The A29 is equipped with an audio recording loop
which may be used with recording devices such as a CD
recorder, DAT recorder, cassette recorder, VCR or PVR.
Connect the RECORD OUT output socket to the
input socket of your recording device (usually labelled
RECORD or IN).
To record from a particular source, press the appropriate
source button (for example, TUNER).

Pre-amplifier output

To use your A29 as a dedeicated pre-amplifier, or as part
of bi-amped system, connect the PRE OUT sockets to
the input sockets of your power amplifier.
See page 7 for connection details and see page 14 for the
output specification.
PHONO AUX CD TUNER SAT

Adjusting the balance

The balance setting allows you to increase the volume of
one channel (left or right) relative to the other. Altering
the balance may help to restore the stereo image for an
off-centre listening position.
Balance can be adjusted from the front panel or from the
remote control. Press the button (or
BALANCE BAL
CR902) to view the current setting, then use the control
knob (or the +/– buttons on the remote) to change the
setting – from L12 to R12, via the neutral value 0.
E-9
POWER / STANDBY
BD PVR AV AUX PHONES
POWER

Listening

Volume control
Use the control knob (or the buttons on the remote)
+/–
to change the volume. Turn the knob clockwise to
increase the volume, anti-clockwise to reduce it.
Listening using headphones
on the
The headphones socket ( ) accepts headphones
PHONES
with an impedance rating between 16Ω and 2k
with a 3.5 mm stereo jack plug.
The pre-amp outputs and speakers are muted when
headphones are plugged in and the front panel display
shows Headphone.
The headphones socket is always active, unless output
has been muted.
Muting output
The output of the A29 can be silenced by pressing
on the front panel (or - on the remote control). If the
unit is muted, the power light changes to orange and
the source is shown on the front display panel (e.g. PVR
MUTE).
-
Press for a second time (or change the volume)
MUTE/
to cancel mute.
, fitted
Ω
MUTE