Maintenance And Storage - Stiga 320 P Manuel D'utilisation

Tondeuse à gazon à conducteur assis

Masquer les pouces

Table Des Matières

Table des Matières

(Translation of the original instructions)

Never place your hands and feet near

or under rotating parts. Keep away

from the discharge opening.

Do not leave the machine stopped on

high grass with the engine running to

avoid the risk of starting a fire.

When using the attachments, never di-

rect the opening towards people.

Use manufacturer-recommended at-

tachments only.

Don't use the machine if the attach-

ments/tools are not installed in their

seats. Driving without attachments

could jeopardise machine stability.

Pay attention when using the grass

catcher and attachments that can alter

the stability of the machine, especially

on slopes.

Do not change the engine settings or

over-rev the engine.

Do not touch the engine parts as they

get very hot when running. Burn hazard.

Disengage the cutting device or power

socket, put in neutral and engage the

parking brake, turn off the engine and

remove the ignition key (checking that

all moving parts are completely sta-

tionary):

a. Whenever the machine is left unat-

tended or the operator dismounts

from the driving seat:

b. Before clearing blockages or unclog-

ging the discharge chute;

c. Before checking, cleaning or working

on the machine;

d. After striking a foreign object. Inspect

the machine for damage and make

repairs before using it again;

Disengage the cutting device or the

power socket and switch off the engine

(making sure that all moving parts are

stationary):

a. Before refuelling;

b. Whenever you remove or reattach the

grass catcher;

c. Before adjusting the cutting height, if

this operation can not be performed

from the driving seat.

ENGLISH

Disengage the cutting device or the

power socket during transport and

whenever it is not in use.

Reduce the throttle setting before

stopping the engine. Shut off the fuel

supply on completing the work, follow-

ing the instructions in the engine man-

ual.

Pay attention to cutting assemblies

with more than one cutting device, as a

rotating cutting device can trigger the

rotation of the others.

WARNING – If something breaks or an

accident occurs whilst working, turn

off the engine immediately and move

the machine away to prevent further

damage; if an accident occurs with

injuries or third parties are injured,

carry out the first aid measures most

suitable for the situation immediately

and contact the medical authorities for

any necessary health care. Carefully

remove any debris which could cause

damage or injury to persons or ani-

mals if ignored.

WARNING! The noise and vibration

levels shown in these instructions

are the maximum levels for use of the

machine. The use of an unbalanced

cutting element, the excessive speed

of movement, or the absence of main-

tenance have a significant influence

on noise emissions and vibrations.

Consequently, it is necessary to take

preventive steps to eliminate possible

damage due to high levels of noise and

stress from vibration. Maintain the ma-

chine well, wear ear protection devic-

es, and take breaks while working.

3.4