Nice Mhouse SL1S Instructions D'installation Et D'utilisation page 62

Declaration in accordance with the Directives: 1999/5/EC (R&TTE), 2004/108/EC (EMC);
2006/42/EC (MD) Appendix II, part B SL1S and SL10S are produced by NICE S.p.a. (TV) I
Note - The contents of this declaration correspond to declarations in the last revision of the official document deposited at the
registered offices of Nice Spa available before this manual was printed. The text herein has been re-edited for editorial purposes.
A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Number: 361/SL1S
Manufacturer's Name:
Address:
Person authorised to compile
the technical documentation: NICE s.p.a
Product type:
Model / Type:
Accessories:
The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the above mentioned
product conforms to the requirements of the following directives:
• 1999/5/EC DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of th 9th March 1999 regarding radio equipment
and telecommunications terminal equipment and the mutual recognition of their conformity, according to the following harmo-
nised standards:
- Health protection (art. 3(1)(a)): EN 62479:2010
- Electric safety (art. 3(1)(a)): EN 60950-1:2006+ A11:2009+A12:2011
- Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.9.2:2011, EN 301 489-3 V1.4.1:2002
- Radio spectrum (art. 3(3)): EN 300 220-2 V2.4.1:2012
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15th December 2004 regarding the approxi-
mation of member state legislation related to electromagnetic compatibility, repealing directive 89/336/EEC, according to the
following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
In addition the product conforms to the following directive according to the requirements for "partly completed machinery":
2006/42/EC Directive OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery, repealing direc-
tive 95/16/EC
• We hereby declare that the relevant technical documentation has been compiled in conformity with Annex VII B of directive 2006/42/EC and
that the following essential requirements have been satisfied:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the "partly
completed machinery", without prejudice to intellectual property rights of the manufacturer.
• The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the "partly
completed machinery", without prejudice to intellectual property rights of the manufacturer.
• The "partly completed machinery" must not be put into service until the final machinery into which it is to be incorporated has been declared
in conformity with the provisions of directive 2006/42/EC.
Furthermore, the product conforms to the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010+A15:2011
EN 60335-2-103:2003+A1:2009
The product also complies, within the constraints of applicable parts, with the following standards:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 29 august 2013
28
ALLEGATO 2
CE Declaration of Conformity
Revision: 2
NICE s.p.a.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Electromechanical gearmotor with built-in control unit and radio receiver
SL1S, SL10S
GTX4, PH100, KS100, FL100
ANNEX 1
Language: EN
Ing. Luigi Paro (Managing Director)