Installation And Removal Of The Monitor Hood; Mounting And Removing The Lens Cap - Olympus PT-059 Mode D'emploi

Installation and removal of the monitor hood

Installation
Fit the monitor hood as shown in the fi gure into the guides above and
below the monitor window one after the other.
Removal
Remove the monitor hood from the guides above and below the monitor
window one after the other by widening the monitor hood.
Guides
EN
Installation Removal

Mounting and removing the lens cap

Fit the lens cap onto the lens ring
as shown in the fi gure. Be sure
to remove the lens cap before
shooting.
EN 40