Using The Accesories; Installing And Removing Of The Monitor Hood; Mounting And Removing The Body Cap - Olympus PT-EP12 Mode D'emploi

Using the accesories

Installing and removing of the monitor hood

Installation
Fit the monitor hood as shown in the figure into the rails above and below the monitor window one after
the other.
Removal
Remove the monitor hood from the rails above and below the monitor window one after the other by
widening the monitor hood.
Rails
Installation Removal

Mounting and removing the body cap

Fit the body cap onto the lens ring as shown in the figure.
Be sure to remove the body cap before shooting.
EN
EN 8