Aqua Medic EVO 500 Mode D'emploi page 8

1. Product description
The EVO 500 consists of the following parts:
- foam cup and lid
- a venturi pump DC Runner 1.2 incl. Aqua Medic 3D-needle wheel, controller and safety
transformer
- retaining unit for mounting in the aquarium
- 8 mm hose incl. sound absorber
2. Parts of the skimmer
Fig. 1: EVO 500
1. Lid for foam cup
2. Foam cup
3. O-Ring 12,5 x 1,5
4. Water level controller
5. Skimmer body
6. Connecting piece for the pump
7. Discharge
8. Venturi pump DC Runner 1.2
9. Holder for the screw
Spare parts list EVO 500
Art.-No. Pict.-No.
410.005-10 Fig. 1, No. 1/2
410.005-11 Fig. 1, No. 1
410.005-13 Fig. 1, No. 3/18
410.005-15 Fig. 1, No. 5
410.005-2 Fig. 1, No. 8
410.005-4 Fig. 4
410.610 Fig. 1, No. 14/15
410.005-5
410.005-21 Fig. 2, No. 4 – 6
410.005-42 Fig. 2, No. 10 - 12
8
10. Holding unit
11. Mounting profile with screws
12. Mounting profile with spacer bolt
13. Spacer with rubber bearings (no picture)
14. Silencer incl. hose connectors
15. Holding unit for sound absorber
16. Holding plate
17. Screws
18. Sealing plug
19. Adjusting screw
Article
Foam cup with top
Lid for foam cup
Plug pressure side with O-ring for foam cup
Skimmer body
Pump DC Runner 1.2
Holding unit cpl.
Silencer 100
Sponge
Air wheel DC Runner 1.2
Air injection nozzle cpl.