Symbols (explanations about symbols if present on tool)
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas or under the rain.
Do not leave outdoors under the rain.
Caution! Risk of injury and/or damage and/or deterioration of product in case
of non-compliance to safety requirements.
Read the instructions manual.
Keep instructions manual for future reference.
Class II product with double or reinforced insulation
Wear protective equipment: goggles or faceshield
Wear protective gloves and boots.
Keep all body parts (esp hands and feet) away from the cutting device.
DANGER: injury hazard. Sharp blades!
Do not touch the blades when product is in use or at rest.
Wear protective gloves before any intervention on the blades.
Keep persons (esp. children) and animals away from product and working
area. Other persons and animals should remain at a safe distance of 3 meters
or more when the machine is being used. The operator is solely responsible
for third persons in the working area.
Caution! Danger of injury from flying parts!
Never cut off over your head. Risk of injury through falling cut-offs.
Keep persons (esp. children) and animals away from product and working
area
Do NOT work close to power lines.
Keep the machine at least 10 meters away from electrical lines or branches
that contact electrical lines.
Noise level (see value on tool).
Wear ear protection
Tool complies with European directives
Keep the power cord away from cutting blades and cutting path.
Disconnect product from its power source before maintenance, cleaning or
any intervention on product; or when you do not use product.
Disconnect tool's plug if power cable or extension cord is damaged or cut
during operation.
Unplug tool by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further
information for its safe disposal.
Page 15 / 37