Warnings And Precautions; Operating Environment; Temperature And Humidity - Mettler Toledo 64060625 Manuel D'installation

1.2.

Warnings and Precautions

Please read these instructions carefully before putting the new battery into operation. Review the
warnings and precautions at the beginning of this manual and follow all instructions.
1.3.

Operating Environment

When selecting a location:
•
•
•
•
1.3.1.

Temperature and Humidity

The 64060625 battery pack can be operated at temperatures ranging from −10° to 40° C (14° to
104° F) at 10% to 95% relative humidity, non-condensing.
The battery pack can be stored at temperatures ranging from –20° to 60° C (–4° to 140° F) at 10
to 95% relative humidity, non-condensing.
1-2 METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
DO NOT INSTALL OR PERFORM ANY SERVICE ON THIS EQUIPMENT BEFORE THE AREA HAS
BEEN SECURED AS NON-HAZARDOUS BY PERSONNEL AUTHORIZED TO DO SO BY THE
RESPONSIBLE PERSON ON SITE.
ALL EQUIPMENT MUST BE INSTALLED IN ACCORDANCE WITH THE INSTALLATION
INSTRUCTIONS DETAILED IN THIS MANUAL. DEVIATION FROM THE INSTRUCTIONS CAN
IMPAIR THE INTRINSIC SAFETY OF THE TERMINAL AND VOID THE AGENCY APPROVAL.
WHEN THIS EQUIPMENT IS INCLUDED AS A COMPONENT PART OF A SYSTEM, THE
RESULTING DESIGN MUST BE REVIEWED BY QUALIFIED PERSONNEL WHO ARE FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF ALL COMPONENTS IN THE SYSTEM AND
THE POTENTIAL HAZARDS INVOLVED. FAILURE TO OBSERVE THIS PRECAUTION COULD
RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
Choose a stable, vibration-free surface to mount the battery pack
Mount the battery pack in a protected area to prevent damage
Ensure the three meter (10 ft.) output cable will reach the intrinsically safe terminal
Confirm there are no caustic chemicals present that would attack stainless steel and require use
of a protective enclosure
WARNING
WARNING
WARNING
64062816 | 05 | 04/2016