European Approval - Mettler Toledo 64060625 Manuel D'installation

2.4.

European Approval

Approval details for the 64060625 battery pack when installed according to European requirements
are listed in this section. The European safety approvals are based upon entity values.
The 64060625 intrinsically safe battery pack has been evaluated and certified as:
The approved entity parameters for Europe for the 64060625 intrinsically safe battery pack are
listed in Table 2-4.
The maximum charging voltage that can be applied to the 64060625 battery pack is noted in
Table 2-5. This is noted as the U
64062816 | 05 | 04/2016
Entity Parameters and Non-incendive Field Wiring
Table 2-3: DC Power NIFW Parameters - U.S.
Non-incendive Field Wiring Parameters
•
FM 07ATEX0043
II 2 G Ex ib IIC T5 Ta = 40˚C (Gas)
•
• II 2 D Ex ibD 21 T93°C (Dust)
Table 2-4: DC Power Entity Values - Europe
DC Output Power Entity Values for European Approval
U
I
o
P
C
L
o
m
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
Parameters for U.S. Approval
6.83 W
P
o
C 1.41 µF
a
L 8.7 µH
a
for U.S. Approval
V 12.0 VDC
oc
I 3.03 A
sc
6.83 W
P
o
C 8.4 µF
a
L 14 µH
a
o
o
o
value on the label as is part of the approval.
12.0 VDC
3.03 A
6.83 W
1.41 µF
8.7 µH
2-3