Battery Charger Accessory - Mettler Toledo 64060625 Manuel D'installation

Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Battery Type
Output Power
Hazardous Area Approvals
1.8.

Battery Charger Accessory

Five battery charger accessories are available for charging the NiMH battery pack.
1-6 METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
Specifications
236 mm × 133 mm × 76 mm
(9.3 in. × 5.3 in. × 3.0 in.)
4.0 kg (8.7 lb)
Provides IP66 protection—comparable to Type 4x sealing. Connector has
IP67 rating.
Can be operated at temperatures ranging from −10° to 40° C (14° to 104° F)
at 10% to 95% relative humidity non-condensing.
Consists of eight NiMH battery cells in an encapsulated pack for a total power
of 8Ah.
Output voltage 7.5 to 12 VDC @ 130mA minimum (170mA minimum for
IDNet) to 3 A maximum. A 3m (10 ft.) cable included in 64060627 kit. Cable
not designed to be extended.
United States
Approved for use in a safe area or in Class I, II, III; Groups A,B,C,D,E,F,G;
Division 1 classified areas. Approved for Class I, Zone 1 areas or in for
Class I, II, Division 2, Groups A, B, C, D, F and G hazardous areas.
Canada
Approved for use in a safe area or in Class I, II, III; Groups A,B,C,D,E,F,G;
Division 1 classified areas. Approved for Class I, II, Division 2, Groups A, B,
C, D, F and G hazardous areas.
Europe (ATEX)
Approved as a Category 2 device for use in a safe area or in Zone1 and
Zone 21 classified areas.
IECEx FMG 12.0026 Issue No.: 0
Intrinsic Safety 'ib', 'ibD'
Ex ib IIC T5 Gb
Ex ibD 21 T93° C Db
DO NOT USE THE BATTERY CHARGER WITHIN THE HAZARDOUS AREA. THE BATTERY
CHARGER IS NOT DESIGNED FOR NOR INTENDED FOR USE WITHIN HAZARDOUS AREAS.
WARNING
64062816 | 05 | 04/2016