Mettler Toledo 64060625 Manuel D'installation page 15

The battery chargers for use with the battery pack conform to the specifications listed in Table 1-4
and Table 1-5.
Enclosure Type
Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Storage Environment
Input Power
Output Power
1-8 METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
Figure 1-7: Friwo Battery Charger Dimensions
Figure 1-8: Cell-Con Battery Charger Dimensions
Table 1-4: Friwo Battery Charger Specifications
Battery Charger Specifications
General purpose plastic
5.8 in. X 2.7 in. X 1.9 in.
131 mm x 61 mm x 1.9 in
1.2 lb / 0.6 kg
Provides only general purpose environmental protection. Connector to battery
has IP67 rating.
Can be operated at temperatures ranging from 0° to 40° C (14° to 104° F) at
10% to 95% relative humidity non-condensing. The battery charger MUST NOT
be used inside a hazardous area. It MUST BE used only in a safe area.
Can be stored at temperatures ranging from -40° to +70° C (-40° to 158° F)
at 10% to 95% relative humidity non-condensing.
Operates from 90-264 VAC, 50-60Hz at 700mA. Maximum of 37 W.
Provides from 7 - 20 VDC charging voltage. Current of 1400 mA during fast
charge and 27mA during trickle charge. Maximum output voltage is 20 VDC.
64062816 | 05 | 04/2016