EdilKamin FANTASY Installation, Usage Et Maintenance page 36

3rd SOLUTION: KIT 11 (code 645700) con KIT 11 BIS (code 645710) - BOTH ROOMS
Note: THE PIPES ON THE HOT AIR OUTLETS MUST BE FITTED BEFORE APPLYING THE COVERINGS AND
PRIOR TO DISASSEMBLY OF THE UPPER CAST IRON SIDE FLANK. THE FIRST PART OF THE FLEXIBLE
PIPE MUST BE COMPLETELY "RELAXED" IN SUCH AWAY TO ELIMINATE CORRUGATION. IN THIS WAY,
THE INTERNAL DIAMETER WILL BE SLIGHTLY ENLARGED TO FAVOUR ENTRANCE.
- De ne the position of the stove with respect to the walling ( g. a).
- Disassemble the upper part of the back (132) and remove the predrilled caps in correspondence with the hot air outlet pipes ( g. b).
- Activate the hot air channelling control lever (13), removing the locking plates (133) ( g. b).
- Cut the ue cover to size (6) on the wall side ( g.c)
- Place the stove in its de nite position.
- Extend the aluminium pipes (2-3) for hot air channelling, without connecting them to the stove outlets.
- Fit the medallions (5) on the aluminium pipes and the pipe covers (6a) without locking them in ( g. c).
- Fit the aluminium pipes to the hot air outlets on the back of the stove (8) ( g. d).
- Replace the upper part of the back (132).
- Place the pipe covers (6) in the de nite position and fasten them to the back of the stove with the supplied screws (7) ( g. d).
- Install the terminal outlets (4) and relative aluminium pipes (2-3), fastening them with the wall collars (9) and
the dowels with screws (10-11)( g. d).
- Fasten the wall medallions (5) with silicone ( g d).
g. a
g. c
6
g. d
8
7
6
1 Box
2 Ø 10 pipe
3 Ø 10 pipe
4 Smoke outlet end-piece
5 Wall medallion
6a Flue cover
7 Flue cover fastening screws
8 Pipe blocking clamp
9 Wall collar
10 Screws
11 Dowels
INSTALLATION
g. b
2
3
5
5
8
5
4
8
4
5
132
133
13
132
4
5
3
6
6
n°
1
1
1
2
2
2
8
4
2
4
4
- 36
-
1
5
2
7
4
3 8
9
8
10 9
4
10 9
8
2
5
KIT 11 KIT 11 BIS
645740 643910
- 643900
162520
293430 293430
644190 644190
645730 645730
168260 168260
46160
- 645750
-
-
5
6
6a
6
6a
9
10 11
-
46160
8410
8520