EdilKamin FANTASY Installation, Usage Et Maintenance page 28

• ELECTRONIC EQUIPMENT
®
LEONARDO is a combustion safety and control system which allows optimal performance in all
conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke
temperature.
The detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
®
The LEONARDO system offers constant combustion, automatically regulating the draft based on the
characteristics of the chimney ue (bends, length, shape, diameter, etc..) and environmental conditions
(wind, humidity, atmospheric pressure, installations at high altitude, etc.).
The standards for installation must be respected.
®
LEONARDO system is also able to recognise the type of pellets and automatically djust the ow mo-
ment by moment to ensure the required level of combustion.
• ELECTRONIC CIRCUIT BOARD
SERIAL PORT
The Dealer can install an optional on the AUX outlet for controlling the process of
switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the
stove. Can be connected via special optional trestle (code 640560).
BACKUP BATTERY
A backup battery is found on the control board (3-Volt CR 2032 battery). Its mal-
function is indicated with the following messages (not considered a defect but due to
normal wear-and-tear): "Battery check".
For more detailed information, please contact the DEALER who has performed the rst
1st ignition.
CHARACTERISTICS
Panel control
backup battery
Lithium
+
lithium CR2032
CR2032
M SCREW
Smoke expulsion motor
ventilation
ow
sensor
optional
smoke rpm
230 vac power
supply
50Hz +/-10%
PORT BACK STOVE
FUSE *
two fuses are inserted in the socket with
switch, located on the back of the stove,
one of which operational * and the other
is held in reserve **.
- 28
-
sensor air
ambient
Vacuum gauge
Reading
points
* **