Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8703159
12. Do not by-pass or disable any safety devices.
13. Airflow over this motor is required to keep it cool.
ELECTRICAL SAFETY
WARNING!
Do not touch or handle a live tool with any part of your body that
is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING!
To reduce risk of electric shock, be certain that the plug is
connected to a properly
1.
Disconnect tool from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the tool to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
4.
In the event of a power failure, turn off the machine as soon as the power
is interrupted. The possibility of accidental injury could occur if the power
returns and the unit is not switched off.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
6
1-1/2 HP Totally Enclosed Air Over Electric Motor
grounded receptacle.
For technical questions call 1-800-665-8685
V4.0
Publicité
Table des Matières
