NSK Ti-Max X450L Manuel D'opération page 10

7-2 Cleaning (Handpiece)
1) Remove debris from the handpiece. Do not use a wire brush.
2) Wipe clean with an alcohol saturated cotton swab or cloth.
This icon indicates that the handpiece can be washed in a Thermo Disinfector.
Refer to the Thermo-Disinfector manual for proper automatic washing procedures.
CAUTION
· After washing with Thermo-Disinfector and prior to lubrication ensure that the handpiece is free of any internal moisture. Moisture inside the
handpiece could reduce the effect of lubrication and cause corrosion.
· Never use and solvent such as benzine or thinner to clean the handpiece.
9