Advanced Watch Functions - Scubapro XTENDER Mode D'emploi

Note:
• The acoustic alarms can not be deactivated using the buttons
• If two alarms are activated simultaneously, the fi rst is canceled and
the second begins
• The alarm clock sound can be deactivated by pressing one of the
buttons. You can deactivate the alarm clock alert during the fi rst
20 seconds. When you deactivate the alarm, the icon stops fl ashing
but stays on
• The alarms activated in Dive Mode are deactivated when the
computer detects a depth of less than 1.4 meters (4.5 feet) and the
E button no longer detects contact with the water
• The alarms indicating that a certain setting or given mode cannot be
accessed are interrupted when the wet contact button detects water.

ADVANCED WATCH FUNCTIONS

Automatic return
When Xtender is in Alarm Clock, Second Time Zone, Planner, or Logbook Mode
(or a mode other than Watch Mode) and the mode is changed by pressing the
"mode" button after any of the other buttons have been used, the computer
automatically returns to Watch Mode. In all modes except for Dive Mode or Time
Set Mode, the computer automatically returns to Watch Mode if no button is
pressed for 2-3 minutes (or 14-15 minutes when in PC data Transfer Mode). In
Dive Mode, the computer returns to Watch Mode 2-3 minutes after the display
has been automatically updated.
Second Time Zone
Xtender keeps track of the current time in two time zones, which is very useful for
divers who travel a lot. The second time zone can differ ±23 hours and 30 minutes
15