Emerson HIGHPOINTE LED CF205LBQ0 Mode D'emploi page 24

8.6
The Light ( ) Push Button turns the light on and off
and controls the light intensity (Figure 39).
To vary the intensity of the light, hold the
( ) Button down until the desired light intensity is
reached, then release the button (Figure 39).
NOTE: When turning the light on, light will turn on
at the light intensity previously selected.
Your Remote Control has full control of your fan and light.
The Power Indicator Light (blue glow) will illuminate
while any button is pressed, indicating that the Battery
is good.
POWER INDICATOR
LIGHT
LIGHT BUTTON
Figure 39
COVER
WALL
BRACKET
SCREWS (2)
Figure 41
24
HIGH TO LOW
BUTTONS
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
U.L. Model No.: CF205L-1