Emerson HIGHPOINTE LED CF205LBQ0 Mode D'emploi page 23

8.4
When power is restored, push and hold the Fan
OFF Button ( ) for 3 to 5 seconds to set the code in
the receiver (Figure 37).
NOTE: The Power Indicator Light on the Remote
Control will flash when the code is set.
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
8.5
Your Emerson Ceiling Fan consists of Hand-Held
Remote Control Transmitter and a Receiver which is
mounted under the Fan Ceiling Cover.
The Remote Control is designed to separately control
your Ceiling Fan speed and light intensity (Figure 38).
There are four push Buttons ( . , .. , ... , .... ) to set the fan
speed and turn the fan off.
POWER INDICATOR
LIGHT
OFF BUTTON
Figure 37
POWER INDICATOR
LIGHT
OFF BUTTON
Figure 38
23
HIGH TO LOW
BUTTONS
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205L-1