Emerson HIGHPOINTE LED CF205LBQ0 Mode D'emploi page 19

6.5
Lift the Ceiling Cover up to the Threaded Studs and turn
until Studs protrude through the Holes in the Ceiling Cover
(Figure 30).
Secure the Ceiling Cover in place by sliding Lockwashers
over the Threaded Studs and installing the two Knurled
Knobs (supplied in parts bag). (Figure 30).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
To avoid possible fire or shock, make sure that
antenna wire is not pinched between the ceiling cover
and the ceiling.
6. Final Assembly
(Continued)
LOCKWASHER (2)
KNURLED
KNOB (2)
Figure 30
19
CEILING
COVER
THREADED
STUD (2)
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205L-1