Timer Functions - mundoclima H6M Série Manuel D'installation

Up-Down airflow direction and swing (on some models)
Use button to adjust the Up-down air flowdirection.
1.When press the button once and quickly ,the Up-down airflow direction setting
feature of the louver is activated.The moving angle of the louver is 6° for each
press. Keep pressing the button to move the louver to the desired position.
2.If press the button long,the auto Up-down swing feature of the louver is activated.
The louver would swing automatically. Press it again to stop.
When the auto Up-down swing feature of the louver is activated,the
(Not applicable to all the models)
The operation can refer to the following instructions for the unit with four Up-down
louvers can be operated individually.
1.Press the button to activate the Up-down adjusting louver function.
The mark will flash. (Not applicable to all the models)
2. Push the Mode(A/B) button to select Unit A or Unit B, the wire controller select in a
sequence that goes from (this step do not need to perform if the wire controller is
connected with one unit only):
3.Pressing the button "+"
you push the button,the wire controller select in a sequence that goes from:(the icon
means the four louvers move at the same time.)
-0
-0 -1
-2
4. And then use button to adjust the Up-down airflow direction of the selected louver.

9. Timer functions

WEEKLY timer
Use this timer function to set operating times for each day of the week.
On timer
Use this timer function to start air conditioner operation.The timer operates
and air conditioner operation starts after the time has passed.
Off timer
Use this timer function to stop air conditioner operation.The timer operates
and air conditioner operation stops after the time has passed.
On and Off timer
Use this timer function to start and stop air conditioner operation.The timer
operates and air conditioner operation starts and stops after the time has
passed.
REMOTE CONTROLLER
A
can select the movement of four louvers.Each time
-3 -4
mark appears.
B
92