Technical Data; Use Of Extension Cords - Hilti SCW 70 Mode D'emploi

4

Technical data

4.1 Technical data
Weight in accordance with EPTA
procedure 01
Dimensions (L x W x H)
Base plate
Saw blade diameter
Saw blade disc thickness
Kerf width
Saw blade arbor size
Cutting depth at 0°
Cutting depth at 45°
Cutting depth at 56°
No-load speed
Protection class
5

Use of extension cords

WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
• Use only extension cords of a type approved for the application and with conductors of adequate
cross-section. Otherwise the performance of the appliance may be affected and the cord may overheat.
• Regularly check the extension cord for damage.
• Replace damaged extension cords.
• When working outdoors, use only extension cords that are approved and correspondingly marked for
this application.
Recommended minimum conductor gauge (cross section) and maximum cable length with 120V
supply voltage
Extension cables
Extension cable conductor gauge
Extension cable conductor gauge
Extension cable length
Extension cable length
6 English
SCW 70
5.1 kg
317 x 236 x 269 mm
(12.48 x 9.29 x 10.59 in)
290 x 170 mm (11.42 x 6.69 in)
184 mm ... 190 mm
(7.2 in ... 7.5 in)
1.1 mm ... 1.5 mm
(0.04 in ... 0.06 in)
1.7 mm ... 2.3 mm
(0.07 in ... 0.09 in)
30 mm
(1.2 in)
0 mm ... 67 mm
(0 in ... 2.6 in)
0 mm ... 49 mm
(0 in ... 1.9 in)
0 mm ... 38 mm
(0 in ... 1.5 in)
5,800 /min
II
AWG 16 AWG 14
1,31 mm² 2,08 mm²
2,58 kcmil 4,11 kcmil
25 m 30 m
75 ft 100 ft
WSC 7.25­S
5.1 kg
317 x 236 x 269 mm
(12.48 x 9.29 x 10.59 in)
290 x 170 mm (11.42 x 6.69 in)
184 mm ... 190 mm
(7.2 in ... 7.5 in)
1.1 mm ... 1.5 mm
(0.04 in ... 0.06 in)
1.7 mm ... 2.3 mm
(0.07 in ... 0.09 in)
5/8 in
0 mm ... 67 mm
(0 in ... 2.6 in)
0 mm ... 49 mm
(0 in ... 1.9 in)
0 mm ... 38 mm
(0 in ... 1.5 in)
5,800 /min
II
AWG 12 AWG 10
3,31 mm² 5,26 mm²
6,53 kcmil 10,4 kcmil
50 m 100 m
150 ft 250 ft
322275
*322275*