Technical File - Robert Juliat TOPAZE 1119 CS Dossier Technique

THE IDENTIFICATION PLATES.
- The identification plate situated on the 1200W MSD Follow spot.
WARNING DISCHARGE SPOTLIGHT - OPERATING INSTRUCTIONS :
• Read user's instructions before using this lighting unit.
• High voltage ignition: disconnect from the mains before any servicing.
• Bulb and holder hot: wait until the unit is cold, before servicing.
• U.V. rays : Protect your eyes. • Service only by qualified personnel.
ATTENTION PROJECTEUR A DECHARGE - PRECAUTIONS D'UTILISATION :
• Avant de mettre l'appareil en service, veuillez lire les consignes d'utilisation.
• Amorçage haute tension: mise hors tension obligatoire avant toute intervention.
• Lampe et support chauds: attendre que l'appareil soit froid avant toute intervention.
• Emission de rayons U.V.:
Protéger votre vue.
• Intervention par technicien qualifié.
1419 "MANON" / 1119 "TOPAZE"
2
1 Logo, manufacturer's name and origin of the product.
2 Lighting unit's reference & name.
3 Serial number.
4 European conformity.
5 Net weight without accessories.
6 Technical characteristics :
- MODELE = Light unit model.
- VERS. = The unit version & lamp power.
- PSU = The type of power supply unit necessary.
- P = Maximum power input.
- IP 20 = indoor use ONLY.
- Identification plate situated on the 1200W power supply unit (P.S.U.):
Version : 230V.
1
ALIMENTATION POUR LAMPE A DECHARGE
DISCHARGE LAMP POWER SUPPLY UNIT
Lire le manuel avant utilisation - Utilisation et maintenance par professionnel
uniquement / Read manual before use - Service only by qualified personnel.
2
MOD.
208/245V 50/60Hz AC
U
in
0,85...0,95
COS
0...40°C
t°a t°c
3
Version : 110V.
ALIMENTATION POUR LAMPE A DECHARGE
DISCHARGE LAMP POWER SUPPLY UNIT
Lire le manuel avant utilisation - Utilisation et maintenance par professionnel
uniquement / Read manual before use - Service only by qualified personnel.
MOD.
105/115V 60Hz AC
U
in
0,75...0,90
COS
0...40°C
t°a t°c
Units :
- Dimensions = metre (m) millimetre (mm).
- Weight = kilogram (kg).
- Intensity = Ampere (A) milliampere (mA).
- Voltage = Volt (V).
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
1200W MSD COLD STRIKE FOLLOWSPOTS
12
10
Ø 40mm
MAXI
85
SOCKET LIBERATION
RELEASE DOUILLE
11
4
5
VERS.
max. 6A
I
in
1550W
Pa
60°C 20
IP
Made in the EU - France -
.com
4
VERS.
max. 12A
I
in
1700W
Pa
20
70°C
IP
Made in the EU - France -
.com

TECHNICAL FILE

1 8 6
robert juliat
MOD.
www.robertjuliat.fr
Made in the EU - France -
PSU
Alim.
MSD
2.8m 100V
U
1200W I
L
L
G22
VERS.
1200W
P IP
40°C
t°a t°c
SERIAL / N° SERIE
GOBO
"A" SIZE
7 9 3
- U = Nominal lamp voltage at the lamp terminal.
L
- I = Nominal intensity of the lamp.
L
- t°a = Surrounding temperature.
- t°c = Maximum external temperature of the unit.
7 Restrictive operating position : front view.
8 Minimum distance between a flammable
material and the lighting unit.
9 Gobo size.
10 Admissible lamps & type of lamp base accepted.
11 WEEE directive label.
12 User's instructions.
1 Power supply description.
7
2 Power supply reference & technical characteristics :
8
- MOD. = Unit model.
6 - VERS. = The unit version.
- Uin = Nominal voltage input.
- Iin = Nominal intensity.
- COS = Dephasing between the voltage & current.
- Pa = Power absorbed.
- t°a = Surrounding temperature.
- t°c = Maximum external temperature of the unit.
- IP 20 = Indication of protection :
IP20 = indoor use ONLY.
3 Logo, manufacturer's name and origin of the product.
4 Serial number.
5 European conformity.
6 Net weight.
7 WEEE directive label.
8 User's instructions.
- Frequency
- Power
- Temperature
1119 CS & CCS
1419 CS & CCS
User's instructions :
13,8A
read the previous page atten-
5
tively.
20
230°C
= Hertz (Hz).
= Watt (W).
= Degree Celsius (°C).
Section A - 3