Cleaning - TechniSat VIOLA 2 Mode D'emploi

9 Cleaning

To prevent the risk of an electric shock, you may not clean the device using a
wet cloth or under running water. Prior to cleaning, pull out the mains plug and
switch off the device.
You may not use scouring pads, scouring powder and solvents such as alcohol or
petrol.
Do not use any of the following substances: salt water, insecticides, chlorine or
acid-based solvents (ammonium chloride).
Clean the housing using a soft, moist cloth. Do not use spirit, thinners, etc.; you
could damage the surface of the device.
Only clean the display with a soft, cotton cloth. If required, use a cotton cloth with
small amounts of non-alkaline, diluted, water or alcohol-based soap solution.
Gently clean the surface using the cotton cloth.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
61