Scan Setting - TechniSat VIOLA 2 Mode D'emploi

7.4 Scan setting

In this menu item it is possible to set the sensitivity of the scan.
> Hold down the Info/Menu button and use the Tune + or Tune - buttons to select
the [Scan setting] item. Press the Enter button.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations setting the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise. When using for the first time, and after carrying out the factory settings,
the [Strong stations only] menu item is preset.
50