End Diffuser Assembly - L.B. White Premier TS080 Manuel Du Propriétaire

End Diffuser
Accessory 26350
(Not included)
1. Wrap the duct clamp around duct and collar.
Saddle of clamp lays over duct coil. Connect
clamp ends together and tighten securely.
See Fig. 10.
FIG. 10
INSERT TAB AT BOTTOM OF COLLAR
INTO SLOT BEFORE TIGHTENING
WING SCREWS INTO CAGE NUTS.
2. Position the diffuser under the tent wall
as shown. Lay the tent material within the
channel of the diffuser. Ensure the material is
securely anchored within the channel.
See Fig. 11.
FIG. 11
DUCT EXTENDED
TO FULL LENGTH
SLOT
WING SCREW
TENT SIDE WALL
MATERIAL LOCATED IN
CHANNEL AND ANCHORED
SECURELY
AIR DIFFUSER
Owner's Manual • Premier 80-170
Premier Ductable Heaters
CAGE NUT
TS170G-07
17