Wheel, Leg & Lifting Handle Assembly (Premier 170); Leg Assembly (Premier 80) - L.B. White Premier TS080 Manuel Du Propriétaire

Wheel, Leg & Lifting Handle
Assembly (Premier 170)
See Fig. 3 for assembly of components. Ensure all
hardware is tightened securely.
FIG. 3
1 BOLT 5/16-18 X 1"
AND 1 WASHER 5/16"
AT EACH END
HANDLE - U
WITH 8 1/2" LEGS
AND AXLE HOLE
NUTS 5/16-18
(2 PER SIDE)

Leg Assembly (Premier 80)

Assemble the legs to the heater as shown. Tighten
all hardware securely.
FIG. 4
Premier Ductable Heaters
COTTER
PIN
SPACER
HUB CAP (PRESS ON)
BOLTS 5/16-18 X 1"
(QUANTITY 8)
INSTALL CAGE NUTS AS SHOWN
BEFORE BOLTING
SUPPORT TO HEATER
Owner's Manual • Premier 80-170
REMOVE CASE SCREW AT EACH
END OF HEATER (BOTH SIDES)
BEFORE INSTALLING U-HANDLES.
HANDLE - U, WITH 8" LEGS
WASHER 5/16 (QUANTITY 8)
BOLTS 5/16-18 X 1"
(QUANTITY 10)
INSTALL CAGE NUTS AS SHOWN
BEFORE BOLTING
SUPPORT TO HEATER
13