Hose And Regulator Assembly - L.B. White Premier TS080 Manuel Du Propriétaire

Premier Ductable Heaters
14
Hose and Regulator
Assembly
1. Connect rigid end of hose to regulator outlet.
Connect other end to hose adapter at heater.
Tighten securely. See Fig 5.
FIG. 5
RIGID END
2. The hose may be coiled up and hung on the
hose hanger as shown in Fig. 6.
3. For Premier 170 heaters, store the regulator
in the storage bracket (Fig. 6) when the
regulator is not in use.
FIG. 6
Owner's Manual • Premier 80-170
Thermostat Assembly
(All models - kit part
number is 09454)
1. Connect male plug on heater into female
2. Plug male side of series tap plug into
FIG. 7
SWIVEL END
ADAPTER
POWER CORD
REGULATOR IN
BRACKET
side of FIG. 7 series tap plug on thermostat.
See Fig. 7.
grounded, heavy-duty, electrical extension
cord. Plug extension cord into approved
electrical outlet.
SERIES TAP PLUG
THERMOSTAT
HEAVY DUTY
EXTENSION CORD
WITH GROUND