Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Installation and connection information
4.5
Fitting the reduction sealing ring/4-seal insert
EN-13
1.
Unscrew the cap nuts (2).
2. Remove the existing sealing ring from the metal sleeve (3).
3. Insert the reduction sealing ring (1) in the M20 cable gland (for cables ≤8 mm).
Note:
It is essential to irst insert the side with the sealing lip in the metal sleeve!
4. Insert the 4-seal insert (4) in the M25 cable gland.
5. Tighten the cap nuts (2) again.
Cable Junction Box PR 6130/08
Minebea Intec
Publicité
Chapitres
Table des Matières
