Installation And Connection Information; General Information; Terminals And Jumpers - Minebea Intec PR 6130/08 Manuel D'installation

Cable Junction Box PR 6130/08

4 Installation and connection information

4.1

General information

4.2

Terminals and jumpers

Minebea Intec
-
Only use the cable glands provided by the manufacturer.
-
Install the junction box so that the cable glands are on the bottom.
- Do not open the junction box when connected to the voltage supply.
Note:
At ambient temperatures >45°C, cables that are suitable for at least 85°C must be used.
Signal + green
Signal - gray
Supply + red
Terminal contacts + measuring voltage (load cells)
1–8
Terminal contact + measuring voltage (connection cable)
IND
Terminal contacts - measuring voltage (load cells)
1–8
Terminal contact - measuring voltage (connection cable)
IND
Terminal contacts + supply voltage (load cells)
1–8
Terminal contact + supply voltage (connection cable)
IND
Terminal contact S + sense (connection cable – white)
4 Installation and connection information
EN-10