Publicité
Every precaution has been taken at the factory to ensure that the car reaches the customer in the
best possible condition. A few preparatory operations remain, however, which in the best interests
ofall, must be carefully carried out by the selling Distributor or Dealer before the car is handed to
the customer.
Details ofthe preparation are as follows :
MECHANICAL
1. Check cooling system for leaks and top up
radiator level as necessary
2. Check carbutterors and petrol system
for leaks.
3. Check brake/clutch master cylinders
fluid level and top up if necessary.
4. Check and adjust tyre pressures.
ELECTRICAL
1. top up battery with distilled water as
necessary
2. Check windscreen wiper operation
3. Check operation of horn.
4. Check all instruments for operation.
5. Check flasher operation.
4. Check lamps for operation.
LUBRICATION
Check engine for correct oil level.
1.
EXAMEN AVANT LIVRAISON
COACH
GENERAL FINISH
IMPORTANT
Fit front carpets and retainer strips.
1.
1. Examine paintwork, touching-up as
necessary
2. Check interior trim and seats for
cleanliness and slide(s) for correct
operation.
3. Remove all masking tape and anti-
corrosive preparation for chromium
plating.
4. Wash and polish car, examine for leaks.
To avoid possible errors, mark the
appropriate square as each operation is
completed and record on on the back of
this form any points requiring special
attention.
0.201
Publicité
