Canadian Spa North American 60Hz Mode D'emploi page 14

ATTACHING YOUR SPA COVER
The Spa Cover is an important accessory to help preserve the spa's
temperature. The Spa Cover also serves as a safety device, preventing
unauthorized users from entering the spa. Proper installation of the Spa
Cover is an important addition in the spa installation.
1. Remove Spa Cover from packaging.
2. Place Spa Cover on spa in order to allow easy access to the
topside console when opening the cover.
3. Line up attaching straps and secure with mounting hardware.
4. Use locking mechanism to lock Spa Cover in place.
IMPORTANT:
• Always lock Spa Cover in place when not using the spa.
• Do not walk or sit on Spa Cover.
• Remove snow build-up to avoid breaking the foam inner core.
• Do not drag Spa Cover on rough surfaces.
Like any luxury item - a boat, car or recreational vehicle, care and
maintenance is critical to the lasting quality and enjoyment of a spa.
The spa has been designed to provide years of health and relaxation
benefits. Proper care and maintenance outlined in this section is
necessary to ensure the longevity of the spa. Damage caused by
not following care and maintenance guidelines in this section is not
covered by the manufacturer's warranty.
BOTTOM MOUNT
HOT TUB COVER LIFTER.
Fully compatible with Canadian
Spas; this Cover Lifter is the
ideal choice to complement
your hot tub or spa, making
cover removal and replacement
a quick, one-handed operation
while reducing wear and tear on your hot tub cover.
• Mounts directly to the spa
• Can be mounted with optional under-spa brackets without the
need for drilling holes in the skirt.
• Made of black powder-coated Aluminum
• Fits spas up to 96" (2.4 m.)
• Requires 12"-18"(31cm - 46 cm) rear clearance
Owners Manual
Installation: Adding your spa cover
TOP MOUNT HOT TUB COVER LIFTER
Fully compatible with ALL our Canadian Spa hot tubs and spas and
most other brands; this Cover Lifter is the ideal choice to
complement your Hot Tub, making cover removal and replacement a
quick, one-handed operation and reducing wear and tear.
• Low-profile design
• Virtually zero clearance
required behind spa – great for tight spaces (particularly if your
spa is located in a gazebo)
• Mounts directly to the spa
• Fits up to 96"(2.4m) Spas
• Made of Aluminium
CANADIAN SPA CABINET MOUNT LIFTER.
Fully compatible with Canadian Spa Company spas; this cover lifter
is the ideal choice to complement your hot tub or spa, making cover
removal and replacement a quick, one-handed operation while
reducing wear and tear on your hot tub cover.
• Mounts directly to the spa cabinet
• Made of black powder-coated Aluminum
• Fits up to 96" (2.4m) Spas (including swim spa)
• Requires 12"-18" (31cm - 46 cm) rear clearance
Whilst this is the most suitable product to complement our hot tub
range, this product will also fit most regular shaped hot tubs and
spas up to 96" (2.4m) wide.
NOTE: This product requires some tools to assemble and fit,
including: a spanner and a cordless drill.
13