Motor Replacement; Control Board Replacement - Napoleon Fireplaces BEF33H Instructions D'installation Et D'opération

6.5

MOTOR REPLACEMENT

A. To access the 2 screws holding the motor, remove
the refl ector. Pull the refl ector out from the adaptor
to release the refl ector and pull the adaptor from
the motor.
B. Unplug the quick connect motor wire from the wire
harness.
C. Remove the 2 screws holding the motor and take
the motor out of the unit.
6.6

CONTROL BOARD REPLACEMENT

A. To prevent stripping of the plastic plugs on the back of the control board, hold the plugs with pliers
while removing each of the 4 screws.
B. Unplug all the wires connected on the control board.
ADAPTOR
REFLECTOR
W415-1299 / B /
19
MOTOR
EN
06.16.14