Aiming The Dome Camera; Connecting To The Network Video Recorder - Avigilon 8.0MP-HD-DOME-360 Guide D'installation

Table:Wire Length for Different Wire Gauges
Wire Gauge
AWG
24
22
20
18
16

Aiming the Dome Camera

1. Loosen the mounting screws.
2. Turn the lenses to the desired direction by rotating the
base.
3. Once satisfied, secure the dome camera's position by
tightening the mounting screws.
4. If the image is upside down, flip the image rotation switch
to rotate the image by a 180˚ angle.

Connecting to the Network Video Recorder

Important: To avoid networking problems, only use network switches
recommended by Avigilon.
Connect the dome camera to the same network as the server running
the Avigilon Control Center software. An IP address is automatically
assigned to the device, and will be detected by the software. For more
information on how to configure the connection, see the software user
guide.
2
mm
0.2
0.33
0.5
0.82
1.3
Maximum Run Length
(ft [m])
24 VAC
164[50]
267[81]
428[130]
680[207]
1071[326]
12 VDC
43[13]
71[21]
114[34]
181[55]
285[87]
9