Mounting The Dome Camera - Avigilon DOME-OD-PEND Guide D'installation

Mounting the Dome Camera

1. Drive the three supplied screws into the holes on the
mounting base and leave 6 mm (1/4") between the screw
head and the surface.
2. Pull the cables through the cable entry hole in the
mounting base and the cable entry hole in the dome
camera.
3. Place the dome base on the screws using the keyed
mounting slots and rotate it clockwise.
4. Tighten the screws to hold the dome camera in place.
5. Complete the other installation steps as described in the
dome camera installation guide.
3