Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VI. Tips/Troubleshooting
• Avoid engaging or removing the plow from the vehicle on uneven, sloped, or soft ground. Doing so may
misalign the plow mount and make it difficult for proper engagement and disengagement of the retaining
pins
• If you are having trouble getting an alignment puck into the plow mount, it may need some simple
adjustment. Ensure that the plow and vehicle are sitting level. Ensure that the plow base is in the center
latched position
• After using the plow, the winch cable may begin to tangle around the drum. To fix this, pull off the plow
assembly and free spool the cable out of the winch. Once the tangled cable is pulled off the drum, switch
the winch out of free spool and winch the cable neatly back around the drum. Do NOT grab the cable or
winch hook, instead use the winch hook strap provided with your winch and follow the guidelines as
described in the winching guide.
VII. Maintenance/Care
• Inspect all metal parts on the plow, plow mount, and related hardware prior to each use. Replace all parts
that appear rusted or deformed.
• Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts
and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts must be replaced.
• Check all cables prior to use. Replace cables that are worn or frayed.
• Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely.
• See Warn Plow Operators Guide for more information.
Failure to perform regular inspections and maintenance on the plow, plow mount, winch, and related
hardware may result in vehicle damage and operator injury or death.
If you are having problems with your plow, please follow the steps below:
1.
Reference the installation instructions for tips or notes.
2.
Contact the dealer where you purchased the kit.
3.
Call an authorized WARN Service Center from the warranty sheet included in the kit. Please have the
following information available before calling; part number (listed on front of instructions), date of purchase,
and make, model, and model year of ATV.
4.
Contact WARN customer service at 1-800-543-9276 or www.warn.com. Again, please have the following
information available before calling; part number (listed on front of instructions), date of purchase, and
make, model, and model year of ATV.
Contact your nearest WARN Dealer to order. To find a dealer nearest you, please call the WARN Dealer
locator line at 1 800-910-1122
WARN® INDUSTRIES
WARNING
PAGE 9
82702A0
Publicité
Chapitres
Table des Matières
