Warn Industries 81580 Instructions D'installation page 8

8. Connect the plow termination strap to top tube of
bumper and connect the winch hook to the loop
in the strap. See Figure 12.
9. Turn the ignition switch to ON, and operate the
winch to lift and lower the plow. The plow is now
ready for operation. Read the Plow Operators
Guide before operating plow.
Helpful Hints
When removing the plow assembly from the plow
mount, use a block under the base of the push
tube assembly to hold up the assembly at the
connection height. This will aid in the next
connection on the plow assembly.
WARN® INDUSTRIES PAGE 8
Figure 12
82702A0