Luminance Brands kathy ireland HOME ION ECO Mode D'emploi page 7

3. Ceiling Fan Assembly
3.7
Place the Ceiling Cover over the 6" Downrod (Figure 7) .
Be sure that the Ceiling Cover and the Coupler Cover
are both oriented correctly (Figure 7) .
3.8
Route the two Motor Wires through the Hanger Ball
(Figure 8) .
Reinstall the Hanger Ball on the 6" Downrod as follows:
Position the Pin through the two Holes in the Downrod
and align the Hanger Ball so the Pin is captured in the
Groove in the top of the Hanger Ball (Figure 8) .
Pull the Hanger Ball up tight against the Pin and
securely retighten the Phillips Head Screw in the
Hanger Ball (Figure 8) .
NOTE: A loose Phillips Head Screw could create
Fan wobble.
(Continued)
Figure 7
6" DOWNROD
PHILLIPS HEAD
SET SCREW
Figure 8
Please contact 1-800-777-4440 for further assistance
7
PIN
HANGER BALL
luminancebrands.com
U.L. Model No.: CF5300