Luminance Brands kathy ireland HOME ION ECO Mode D'emploi page 19

7. Optional Installation of No-Light Cover
7.5
Place the No-Light Cover into the opening of the LED
Light Fixture Assembly, aligning the three Flat Areas
on the top edge of the Shade Assembly with the three
raised Dimples on the LED Light Fixture Assembly
Turn the No-Light Cover clockwise until it stops
(Figure 30) .
NOTE: Periodically check that the No-Light Cover
is seated fully clockwise in the LED Light Fixture
Assembly.
DIMPLES
FLAT AREA
NO-LIGHT COVER
ROTATE THE NO-LIGHT COVER CLOCKWISE TO
ENGAGE TO THE LED LIGHT FIXTURE ASSEMBLY DIMPLES
Figure 30
Please contact 1-800-777-4440 for further assistance
19
(Continued)
luminancebrands.com
U.L. Model No.: CF5300