Luminance Brands kathy ireland HOME ION ECO Mode D'emploi page 14

6.5
NOTE: Take care not to scratch the Fan Motor
Housing when installing the Ceiling Fan Blade
Assemblies.
Rotate the Fan Motor Housing to align the Light
Fixture Access Hole with the Fan Motor Hub
Threaded Hole for installation of the Ceiling Fan
Blade Assemblies, as follows:
Securely attach the Ceiling Fan Blade Assembly to the
Fan Motor Hub by tightening the Two Preassembled
1/4-20 x 14mm Pan Head Screws to the Fan Motor Hub
(Figure 21) .
Each Blade Flange has an Interlocking Edge . Rotate
Motor Hub Clockwise and Attach each Ceiling Fan
Blade Assembly to Interlock each Blade Flange
(Figure 21) .
A spare 1/4-20 x 14mm Pan Head Screw with
Lockwasher is in the hardware bag, if needed .
WARNING
!
To reduce the risk of personal injury, do not bend
the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
6.6
Remove one of the three #8-32 x 10mm Flat Head
Screws from the Light Fixture Plate (Figure 22) .
Retain the #8-32 x 10mm Flat Head Screw for future
installation .
Loosen the other two Screws several turns .
6. Final Assembly
(Continued)
PREASSEMBLED 1/4-20 x 14mm PAN
HEAD SCREWS WITH LOCKWASHERS
(2 per flange)
BLADE
FLANGE
Figure 21
LOOSEN TWO #8-32 x 10mm
FLAT HEAD SCREWS
FAN MOTOR
HUB
REMOVE ONE #8-32 x 10mm
FLAT HEAD SCREW
Figure 22
14
LIGHT FIXTURE PLATE
ACCESS HOLE
U.L. Model No.: CF5300